Ceratizit - полный каталог инструмента 2016 EN
для размещения заказа - info@ceratizit.su
Operating principle / benefit
Improved surface finish
With the same feed rate an insert with ‘Masterfinish’ cutting
edge reaches a roughness value Ra which is many times
higher than the one of a conventional insert.
Masterfinish
A280
Conventional
Shorter machining time
If you want to reach the same Ra-value as with a
standard insert, a twice as high feed rate can be
applied for the insert with ‘Masterfinish’ cutting edge
(= shorter production time per component!).
Conventional
Insert:
WNMG 080408EN-TMR
vc: 200 m/min
ap: 1,0 mm
f: 0,4 mm
Insert:
WNMG 080408EN-TFQ
vc: 200 m/min
ap: 1,0 mm
f: 0,4 mm
info@ceratizit.su
www.ceratizit.su