Ceratizit - полный каталог инструмента 2016 EN
для размещения заказа - info@ceratizit.su
MaxiMill 211 system
B131
Milling of hard materials ( 45 HRC)
Recommendations for machining
l2
z
ae max = 75%
Adapter
l2
ae max
l2
Coolant
Plunging
Starting values
V
f
max. 10°
Chip 1 Chip 2
R: –50%
fz = 0,05 mm
vc = 30 - 60 m/min
ap = 0,5 - 2,5 mm
MaxiMill 211-11
Radial force compensation through 'the notch' when
helical plunging or ramping: (r < 2.0 mm)
Radial force compensation
The notch provides additional stability when plunging.
Reduced machining noise and vibration are therefore guaranteed.
The ADVANTAGE for cutting tool experts
Increased cutting performance
Improved surface quality when machining pockets and slots
Swarf control
Low cutting pressure
Low power consumption
Optimum chip evacuation
Minimum vibration
Very good chip formation
No cutting
zone
info@ceratizit.su
www.ceratizit.su