Ceratizit - полный каталог инструмента 2016 EN
для размещения заказа - info@ceratizit.su
Clamping systems
A39
Clamping element
Insert
Shim
Pin
Screw
MaxiLock D
First choice for cutting with negative inserts with hole. Safe
and precise positioning of the insert through double clamp-
ing effect.
Clamping screw
Insert
Shim
Wedge
Lever
MaxiLock N
This clamping system is suitable for all negative form inserts
with holes. The actuation screw can easily be reached from
the upper and the lower side of the tool holder. In the unlocked
position constituent parts remain intact.
Clamping screw
Insert
Shim
Threaded shim screw
MaxiLock S
The form lock screw guarantees a safe connection of the
insert and the tool holder. Chip evacuation is not hindered by
obstructive clamping elements. Due to the neutral insert posi-
tion the effective rake angle is identical to that of the insert
form and geometry.
Clamping element
Insert
Shim
Wedge
Pad pin
MaxiLock P
The insert with a clearance angle of 7° and a cylindrical bore
is fixed with a wedge and claw lock against a fix pin. Up to
three cutting edges can be used (1 support face).
Clamping screw and
clamping claw
Insert
Shim
Shim pin
Simplex N / P
The tried and tested CERATIZIT Simplex clamp-
ing systems are characterised by their simplic-
ity. The insert is clamped by means of a claw.
Not suitable for drawing cuts.
info@ceratizit.su
www.ceratizit.su